Markup vs margin in construction
A 20% markup is not a 20% margin. Here is the difference, the formulas for converting one to the other, and a conversion table for pricing a bid.
By the BidDig team, , 5 min read

Markup is the amount added to a job as a percentage of its cost. Margin is the same amount as a percentage of the selling price. Because the price is always larger than the cost, the margin is always the smaller number: a 20% markup is a 16.7% margin. To convert, margin = markup ÷ (1 + markup).
Here is how the confusion costs money. A contractor adds 20% to a job and expects to keep 20% of the price. At the end of the year the books show less than that, and nobody can find where it went. Nothing was stolen. The 20% was a markup, and the 20% they expected was a margin.
What is the difference between markup and margin?
- Markup is the amount added as a percentage of your cost.
- Margin is the amount added as a percentage of your price.
The dollars are the same. Only the number you divide by changes.
Say a job costs you $100,000 to build and you add a 20% markup.
| Step | Calculation | Result |
|---|---|---|
| Amount added | $100,000 × 0.20 | $20,000 |
| Price | $100,000 + $20,000 | $120,000 |
| Markup | $20,000 ÷ $100,000 | 20% |
| Margin | $20,000 ÷ $120,000 | 16.7% |
You marked up 20% and you kept 16.7% of the price. If, as an example, running the company takes 12% of what you bill, what is left is 16.7% − 12% = 4.7% of the price, not the 8% you thought you had.
Markup vs margin formula
Use decimals in all of these: 25% is 0.25.
To convert one to the other:
- Margin = Markup ÷ (1 + Markup)
- Markup = Margin ÷ (1 − Margin)
A 25% markup is 0.25 ÷ 1.25 = 0.20, a 20% margin. A 20% margin is 0.20 ÷ 0.80 = 0.25, a 25% markup.
To price a job:
- From a markup: Price = Cost × (1 + Markup)
- From a margin: Price = Cost ÷ (1 − Margin)
For a $100,000 cost and a 20% margin: $100,000 ÷ 0.80 = $125,000. Check it: $25,000 on a $125,000 price is 20%.
To measure a finished job:
- Markup = (Price − Cost) ÷ Cost
- Margin = (Price − Cost) ÷ Price
Markup to margin conversion table
Every figure here follows from the formulas above. Check any row yourself.
| Markup on cost | Margin on price |
|---|---|
| 5% | 4.8% |
| 10% | 9.1% |
| 15% | 13.0% |
| 20% | 16.7% |
| 25% | 20.0% |
| 30% | 23.1% |
| 40% | 28.6% |
| 50% | 33.3% |
When you are setting prices you usually know the margin you need and want the markup that produces it. That is the same conversion read the other way.
| Margin you want | Markup to apply |
|---|---|
| 10% | 11.1% |
| 15% | 17.6% |
| 20% | 25.0% |
| 25% | 33.3% |
| 30% | 42.9% |
| 35% | 53.8% |
| 40% | 66.7% |
Notice that the gap widens as the numbers rise. At 10% the two are about one point apart. At a 40% margin the markup is 66.7%.
How do you find the markup for the margin you want?
Use both numbers, each for its own purpose.
Margin is for the business. The cost of running the company is paid out of what you bill, so your accounts naturally show it as a percentage of revenue. Say your books show that 15% of revenue goes to running the company and you want to keep 8%. You need a 15% + 8% = 23% margin on what you sell.
Markup is for the bid. When you price a job you start from cost, so what you apply is a markup. Convert the margin you need into the markup that produces it:
- Write the margin as a decimal: 0.23.
- Divide it by one minus itself: 0.23 ÷ 0.77 = 0.299, a 29.9% markup.
- Or go straight to the price: $100,000 ÷ 0.77 = $129,870.
- Check it: $29,870 ÷ $129,870 = 23.0%.
A contractor who needed 23% and applied 23% as a markup would have priced the same job at $100,000 × 1.23 = $123,000. That is $129,870 − $123,000 = $6,870 short before the work started.
This post covers the conversion only. Where the 15% comes from, and how to turn a year of overhead into a rate you apply to a bid, is a separate calculation. It is worked through in how to calculate overhead and profit in a construction bid.
Common markup and margin mistakes
- The two words are used as if they meant the same thing. The estimator says markup, the owner hears margin, and each assumes the other's number. Agree which one a rate is every time it is quoted.
- A rate measured on revenue is applied to cost. A percentage taken from the income statement is a margin. Added to cost without converting, it always comes up short.
- Two rates are stacked without noticing. Adding 10% and then 10% on top of the result is 1.10 × 1.10 = 1.21, a 21% markup, not 20%. Decide whether your rates stack or add, and do it the same way on every bid.
- Markup is applied to part of the cost. Say a job has $100,000 of cost, of which $40,000 is subcontractors, and the 20% is applied only to the other $60,000. The amount added is $12,000 and the price is $112,000. The margin on the job is $12,000 ÷ $112,000 = 10.7%, not 16.7%.
- A discount is taken off the price as if it were markup. Add 20% to $100,000 and then give 10% off the $120,000 price. The price is $108,000 and the markup left is 8%, not 10%.
How do you check the margin you actually made?
Take last year's figures. Subtract the direct cost of the jobs from revenue, and divide the result by revenue. That is the margin you made.
Say revenue was $3,600,000 and the direct cost of the jobs was $3,000,000.
- Amount over cost: $3,600,000 − $3,000,000 = $600,000
- Margin: $600,000 ÷ $3,600,000 = 16.7%
- Markup: $600,000 ÷ $3,000,000 = 20%
Now compare that with the markup you believed you were applying. If the bids went out at 25% and the year came in at 20%, the difference went somewhere: costs that ran over the estimate, work given away as unpriced changes, or costs that were never in the bid. Finding which is the job of tracking job costs against the bid.
How BidDig handles it
In BidDig, tax, bond, overhead and profit are calculated on every bid from default rates. The company sets its defaults, a user can have their own, and the rates can be changed on an individual bid. Each line item is costed first as material, labor, equipment, subcontractor and contingency, so the rates are applied to the full cost of the work. See estimating and bidding, and how to bid a construction job step by step. For how the pieces fit together, see construction estimating software.



